1. Construction personnel must carry out technical training. Only after passing the examination, can they hold certificates for on-the-job operation.

　　2、設備電源必須有漏電保護裝置；本機必須有可靠的接地保護，防止漏電傷人；設備停用后應切斷設備電源。

　　2. Equipment power supply must have leakage protection device; this machine must have reliable grounding protection to prevent leakage injury; equipment power supply should be cut off after shutdown.

　　3、鋼筋?yuàn)A持在臺鉗上后必須將鋼筋?yuàn)A持緊。加工拐鐵鋼筋時，正對拐鐵處嚴禁站人，以防因鋼筋未夾緊而甩起打人。加工中如有鋼筋松動應立即停機并將鋼筋再次夾緊。鋼筋轉動時不得用手抓握鋼筋，禁止戴手套進行操作。

　　3. When the steel bar is clamped on the bench clamp, the steel bar must be clamped. When processing the steel bar of the Crutching iron, it is strictly forbidden to stop people at the Crutching iron place in order to prevent people from being thrown up and hit because the steel bar is not clamped. If the steel bar is loosened during processing, stop the machine immediately and clamp the steel bar again. When the reinforcing bar rotates, the reinforcing bar shall not be grasped by hand, and gloves shall not be worn for operation.

　　4、滾絲頭滾到前限位后不停機時應立即切斷電源，不要用手去阻止?jié)L絲頭轉動。

　　4. The power supply should be cut off immediately after the screwdriver rolls to the front limit and does not stop the screwdriver from turning by hand.

　　5、滾絲頭在運轉過程中手不得觸摸任何轉動部件，如：滾絲頭、脹刀觸頭等。

　　5. In the course of operation, the hand of the screwdriver shall not touch any rotating parts, such as the screwdriver, the expander contacts, etc.

　　6、設備維修必須有專門人員進行，不得私自進行維修、改裝。

　　6. Maintenance of equipment must be carried out by specialized personnel, and maintenance and modification shall not be carried out privately.

　　7、設備在接通電源后不得用手觸摸任何帶電電器件，以防觸電。不得讓水等具有導電能力的物質進入電器箱。

　　7. The equipment shall not touch any live electrical appliances by hand after switching on the power supply in order to prevent electric shock. Water and other conductive substances should not be allowed to enter the electrical box.

　　8、設備在移動及裝卸時應平穩，以免傾翻傷人。

　　8. The equipment should be stable when moving and loading and unloading, so as not to overturn and injure people.

　　如果您有濟南鋼筋批發的需求可以點擊我們的官網進行咨詢：http://www.xamas-international.com/

　　If you have the wholesale demand of reinforcing steel bar in Jinan, you can click on our official website for consultation: http://www.xamas-international.com/