There are generally three types of steel mesh in Construction: Tower stacking method, buckling method and flat method. The advantages of overlapping method and buckling method are that the number of steel bars is small and the installation is convenient, but the number of steel bars at the joint is large, which affects the stress of the steel mesh. The horizontal reinforcement and the vertical reinforcement at the overlapping point of plane overlapping method are in the same plane, the stress is better, but the overlapping length is greater than the former. The following is the operation specification for installation of building mesh. We hope that we will install in strict accordance with the operation specifications in the construction process. To ensure our personal safety.

　　如何安裝和使用建筑鋼筋網

　　How to install and use building steel fabric
               

　　有兩種類型的建筑網片搭接：受力搭接和非受力搭接。根據規格要求，搭接長度和錨定長度指定如下：

　　There are two types of building mesh lap: stressed lap and unstressed lap. According to the specifications, the lap length and anchor length are specified as follows:

　　1.當承重鋼筋采用搭接法或屈曲法時，每個建筑網在搭接范圍內應少有一個橫向鋼筋，且兩個建筑網中靠外面的一個之間的距離不應小于小于50mm，且兩塊建筑網的搭接長度應不小于d（混凝土強度等于C35）且不小于200mm；當鋼筋采用扁平鋼筋法時，兩塊鋼筋網的搭接長度應不小于37d（混凝土強度等于C35），且不小于300mm。

　　1. When the load-bearing reinforcement adopts the lapping method or the buckling method, there shall be at least one transverse reinforcement in the lapping range of each building network, and the distance between one of the two building networks close to the outside shall not be less than 50 mm, and the lapping length of the two building networks shall not be less than D (concrete strength is equal to C35) and not less than 200 mm; when the reinforcement adopts the flat reinforcement method, the lapping of the two building networks The joint length shall not be less than 37d (concrete strength equal to C35) and not less than 300mm.

　　如何安裝和使用建筑鋼筋網

　　How to install and use building steel fabric

　　2，無應力鋼筋采用搭接或屈曲方式時，每個鋼筋網在搭接范圍內少有一根主鋼筋，搭接長度應不小于20d且不小于150mm；采用平面重疊法時，重疊長度應不小于20d且不小于200mm。

　　2. When the unstressed reinforcement is overlapped or buckled, there shall be at least one main reinforcement within the overlapping range of each reinforcement mesh, and the overlapping length shall be no less than 20d and no less than 150 mm; when the plane overlapping method is adopted, the overlapping length shall be no less than 20d and no less than 200 mm.

　　3.冷軋帶肋鋼絲網的錨固長度應不小于28d（錨固長度上有橫向鋼筋且混凝土強度等于C35時）且不小于200mm。

　　3. The anchoring length of cold-rolled ribbed steel wire mesh shall not be less than 28d (when there is transverse reinforcement on the anchoring length and the concrete strength is equal to C35) and not less than 200mm.

　　以上是關于建筑網片的使用方法，由濟南鋼筋批發整理提供，想要了解更多內容，歡迎咨詢http://www.xamas-international.com網站。

　　The above is about the use of building mesh, which is provided by Jinan Steel wholesale. If you want to know more, please consult us http://www.xamas-international.com Website.